Although there are many types of these storages , the most healthy among them They are water tanks made of stainless steel AISI 304L quality material.
“MONTAJ VE BIRLEŞTIRME IÇIN ZEMIN HAZIRLANIYOR”
Water tanks in buildings were previously located inside the building, in anuninsulated room on the ground floor , in the janitor’s apartment, the boiler room and even in the coal cellar. The concrete wall leaked , reducing its durability. This solution was a costly and unhealthy solution. You do not need such costsin our stainless water tanks.
Later on, these tanks were manufactured using stainless
steel, leak-proof TIG welded corrosion resistant,
food grade AISI 304L materials in order not to weaken the foundation of the building.
17
After the Marmara Earthquake in August 1999, with the amendment made in 2000 to the Planned Areas Type Zoning
Regulation, “Water tanks, It can be
organized in the basement or attic of the building by taking the necessary
drainage and insulation measures, or it can
be placed buried in the ground in the front, side and back gardens
outside the building area, provided that the same conditions are met.
STAINLESS WATER TANK FEATURES
Water tank; It is a tool that keeps water in a closed structure. It serves to store water in buildings. In periods when water is cut off, water tanks come into play . There are more than one type of stainless water tanks. These are: Horizontal cylindrical, Vertical cylindrical, Pyramidatic and special sizes can be manufactured as designed to suit your location.
Custom designed stainless steel water tanks Custom designed stainless steel water tanks can be produced according to the location of your building. Apart from standard stainless steel water tanks, it can be positioned under the stairs, in the idle locations of the parking lot, in the rooms reserved for storage, in your gardens, in short, wherever you wish. What you need to do is to request an appointment with our engineers and make the necessary discovery and design the best water tank selection for you.
Water tanks should be connected to the booster by the shortest route and as straight as possible.
Unnecessary turns affect the pump suction. If the water tank connection port is high, it is lowered to the pump level by making a pipe turn. In the figure below, a different tank and booster connection is made. In this connection, the air required for the booster is supplied by the injector placed on the air tube.
Although there are many types of these storages , the most healthy among them They are water tanks made of stainless steel AISI 304L quality material.
WHERE ARE STAINLESS STEEL EVACUATION DEVICES USED?
and in many such constructions, accumulation tanks are needed.
WATER TANK SECTIONS
1. Water inlet nozzle
2. Water outlet spout
3. Ventilation pipe
4. Discharge spout
5. Level indicator
6. Top maintenance cover
7. Discharge port
WHAT SHOULD BE THE QUALITY OF WATER TANKS INBUILDINGS?
The quality ofwater
tanks on February 17 , 2005, numbered 25730 It is specified by the Regulation on Waterfor Human Consumption
. According to the regulation, the elements to be considered in building
water tanks are as follows:
1. The inner surface of the tanks must be made of materials that will not spoil the quality of the water.
2. Necessary equipment for water analysis should be provided.
3. The warehouse is not adjacent to the building
4. Ventilation shafts should be used to prevent foreign products from entering the warehouse from outside.
