Water distribution collectors are one of the basic elements of mechanical installation.
Collectors, building mechanical water fire suppression, fuel oil, propane gas, steam, It is usedin installations to distribute fluid at equal pressure and flow rate to the main lines. Pump collectors in multi-pump hydrograph systems, hydrograph pump chassis, hydrafor tanks can be manufactured as a complete package.
Collector sets are known by names such as collector sets, collector sets, water collectors.
The desired number of mouths can be produced for special orders.
Collectors with or without valves can be produced on request.
Collectors are optionally available in 304 stainless steel, It can be produced as 316 ct stainless or st37 ct steel.
Special productioncan be made according to customer demands regarding collectors . Special production can be made according to customer demands regarding collectors. There is no TSE standard established for collectors.
SPECIALLY DESIGNED COLLECTORS
Apart from our standard production, our collectors can also be specially produced . Ornamental pools and high-rise site plaza, factory etc. in cases such as design and production can be made according to demand. Collectors can be with sleeve outlet or flange should be used in high pressure collectors.
PASLANMAZ TESİSAT KOLLEKTÖRLERİ AVANTAJLARI NELERDİR?
TECHNICAL SPECIFICATIONS:
Operating pressure -MOP : Max. 10 bar
Operating temperature: Min -20º C Max. 150º C
Mounting position: Horizontal, vertical or tilted.
Flow Direction: Both sides.
In order to prevent corrosion in the water group, it is a definite solution to make the hydrafor pump collector from stainless steel material.
WHERE IS STAINLESS STEEL COLLECTOR USED?
and in many such constructions, accumulation tanks are needed.
Mini valveswith union, collector plug, The set is formed by using the purifier tap and collector clamp together.
HOW TO USE COLLECTORS?
Collectors should be placed in a central location. The collector diameter should be at least 2 diameters larger than the largest diameter of the largest diameter of the collector with a ½ outlet mouth should have a body diameter 1”. The collector length is selected depending on the number of pipes to be connected to it. The collectors should be placed in the most central location, the distance between the collector and the unit is not technically required, red colored handwheel mini valve collector groups are used in hot lines, while blue handwheel mini valve collector groups are used in cold water lines.
